ONVIF PTZ INSTALL
1 Setting the Network Camera over the LAN Purpose: To view and configure the camera via a LAN, you need to connect the network camera in the same subnet with your computer, and install the SADP or iVMS-4200 software to search and change the IP of the network camera.
In a normal streaming setup, encoding acts as a medium, aiding in communication between input and output.There are over 10000 ONVIF conformant Models of Network Video Transmitters (i. “Preset10” and adjust this preset (position, configuration etc.), but all these presets (even the unnecessary ones) can not be deleted from Xeoma.Īs you can see, it’s easy to set up and use such an essential feature as PTZ presets and tours in Xeoma.Ip camera encoding The IP camera products are easy to install and operate. This usually happens with ‘no name’ Chinese cameras.
And these PTZ presets can not be deleted and in rare cases can not be changed. Xeoma takes a list of PTZ presets from the camera through ONVIF, and there are particular cameras that provide Preset1, Preset2…Preset1000. Note: There are particular cameras that provide a list of presets that can not be changed or deleted. If you need several tours for this camera, repeat these steps. When the tour is launched, the camera preview will have an overlay with the preset name that the camera is currently visiting.ħ. When a tour is launched, this icon will change its look and stop the tour when pressed ( 9). Press the “START” button on the right for the camera to start moving to the specified positions. Besides, more icons will be below it – apart from the already known “+” button to add more tours ( 6) there will be an icon for editing the tour currently selected in the “Tour management” field ( 7) an icon for deletion of the tour currently selected in the “Tour management” field ( 8) and an icon for launching the tour currently selected in the “Tour management” field. After you have at least one tour set up, they will be shown and can be chosen from the “Tour management” dropdown list. After the tour schedule is done, click the OK button, and you will get back to the “PTZ Tour” dialog.Ħ. Repeat these actions with all needed presets. The selected preset will be shown in the tour schedule field ( 4) where you can use up and down buttons to shift presets order ( 5). Select a preset from the list and set the time for camera to “stay” in that position with the slider ( 2). You will get to the “PTZ Tour Settings” dialog offering to form a tour schedule out of the available presets (1): Enter the Tour’s name in the “Tour management” field and click the “+” button under it. If you’re in this window to make a guard tour, you need to work with the “Tour management” window:ĥ. All presets created through Xeoma can be removed. Note: a camera might not allow to change or remove its “built-in” presets. If you want to change an already existing preset, first move the camera to the “right” position using the standard Xeoma PTZ control – arrows or hand, and then go into “Tour” menu, select the preset from the list, and click OK. If you’re here to add a preset, enter a new preset’s name in the “Preset settings” field and click the “+” below the field. Once in the “PTZ Tour” window, you can make or change a patrol tour – a schedule of positions (presets) that the camera needs to “visit”, and the stay time in each of the positions. Note: to add a preset or change one of the existing ones, first use arrows and zoom buttons to position the camera in the desired position before you click the “Tour” button.Ĥ. You will see a “PTZ Tour” dialog window that has several fields and options.
To add or change a preset or to make or change a tour click the “Tour” icon. In newer versions of Xeoma, more icons are available for ONVIF PTZ cameras: focus in, focus out, auxiliary commands.Standard joystick (arrows) and zoom in/zoom out buttons to move the PTZ camera.For tours, order and duration of the stop at the specified points (presets) can be set. “Tour” icon – opens a window where presets and tours based on presets can be set up.“Go to preset” icon – opens a list of already added presets (ones you added through Xeoma or ones available in the camera through ONVIF).
In this menu you can see the following items: Click on this icon and the PTZ camera control menu will be opened.Ģ. When you added your PTZ camera that supports ONVIF, you will see a PTZ icon in the upper right corner of the camera preview box or on the lower panel.
ONVIF PTZ PRO
You need to have a valid Xeoma Pro license for at least 1 camera to use this feature.ġ. Attention! PTZ presets and PTZ touring is supported in Xeoma starting from version 18.7.10 for cameras that work through ONVIF.
0 kommentar(er)
